Skip to main content
English
Spanish

Translating step 15

Step 15
Double-check the fit and alignment of your new battery before sticking it down. If your battery came with adhesive pre-installed on the bottom, flip it over and carefully peel away the liner to expose the adhesive. If your battery did not come with adhesive, apply a thin double-sided adhesive tape such as Tesa 61395 to keep your battery in place. Carefully position the battery and set it into place.
  • Double-check the fit and alignment of your new battery before sticking it down.

  • If your battery came with adhesive pre-installed on the bottom, flip it over and carefully peel away the liner to expose the adhesive. If your battery did not come with adhesive, apply a thin double-sided adhesive tape such as Tesa 61395 to keep your battery in place.

  • Carefully position the battery and set it into place.

  • Press and hold each cell firmly for 5-10 seconds to secure it to the lower case.

Comprueba el ajuste y la alineación de tu nueva batería antes de colocarla.

Si tu batería viene con el adhesivo preinstalado en la parte inferior, déle la vuelta y retire con cuidado el revestimiento para exponer el adhesivo. Si su batería no venía con adhesivo, aplique una cinta adhesiva fina de doble cara como la Tesa 61395 para mantener su batería en su lugar.

Coloca la batería con cuidado y colócala en su lugar.

Presiona y sostén cada celda con firmeza durante 5-10 segundos para asegurar la caja inferior.

Your contributions are licensed under the open source Creative Commons license.