Skip to main content
English
Chinese

Translating step 11

Step 11
After a couple minutes, retrieve your first plastic card and insert one corner under the top edge of one of the center battery cells. Wiggle it from side to side and slide it underneath the battery cell until all the adhesive separates. If you have trouble, don't use excessive force and don't deform the battery. Apply more adhesive remover and try again, or skip down two steps for an alternate method.
  • After a couple minutes, retrieve your first plastic card and insert one corner under the top edge of one of the center battery cells.

  • Wiggle it from side to side and slide it underneath the battery cell until all the adhesive separates.

  • If you have trouble, don't use excessive force and don't deform the battery. Apply more adhesive remover and try again, or skip down two steps for an alternate method.

几分钟后,取回你的第一张塑料卡,并将一个角插入一个中央电池的顶部边缘下方。

左右摇晃,然后将其滑到电池下面,直到所有粘合剂分离。

如果遇到麻烦,请不要用力过大,也不要使电池变形。涂上更多的除胶剂,然后重试,或者跳过两个步骤以形成另一种方法。

Your contributions are licensed under the open source Creative Commons license.