Skip to main content
English
Spanish

Translating step 10

Step 10
Apply a few drops of adhesive remover along the top edges of the two center battery cells. There are openings in the chassis underneath these two cells, which allow the adhesive remover to leak through and may prevent it from fully penetrating. Be mindful of leaks, and apply more adhesive remover along the side edges if needed.
  • Apply a few drops of adhesive remover along the top edges of the two center battery cells.

  • There are openings in the chassis underneath these two cells, which allow the adhesive remover to leak through and may prevent it from fully penetrating.

  • Be mindful of leaks, and apply more adhesive remover along the side edges if needed.

Aplica unas gotas de removedor de adhesivo a lo largo de los bordes superiores de las dos celdas de la batería central.

Hay aberturas en el chasis debajo de estas dos celdas, que permiten que el removedor de adhesivo se filtre y puede impedir que penetre completamente.

Ten cuidado con las fugas, y aplica más removedor de adhesivo a lo largo de los bordes laterales si es necesario.

Your contributions are licensed under the open source Creative Commons license.