Skip to main content
English
German

Translating step 10

Step 10
Apply a few drops of adhesive remover along the top edges of the two center battery cells. There are openings in the chassis underneath these two cells, which allow the adhesive remover to leak through and may prevent it from fully penetrating. Be mindful of leaks, and apply more adhesive remover along the side edges if needed.
  • Apply a few drops of adhesive remover along the top edges of the two center battery cells.

  • There are openings in the chassis underneath these two cells, which allow the adhesive remover to leak through and may prevent it from fully penetrating.

  • Be mindful of leaks, and apply more adhesive remover along the side edges if needed.

Träufle ein paar Tropfen Klebstoffentferner an der Oberkante der beiden mittleren Akkuzellen entlang.

Unter diesen beiden Akkuzellen befinden sich Öffnungen im Gehäuse, durch die der Klebstoffentferner hindurchsickern kann und dadurch nicht richtig einwirken kann.

Achte auf Lecks und träufle wenn nötig mehr Klebstoffentferner auf die Seitenkanten.

Your contributions are licensed under the open source Creative Commons license.