Skip to main content
English
Chinese

Translating step 5

Step 5
Pull off the black rubber stopper from your bottle of adhesive remover. Twist to loosen or remove the bottle cap before you cut the applicator tip. This unseals the bottle and allows the pressure to equalize before you cut the applicator tip. If you skip this step, the adhesive remover may spray out unexpectedly when the tip is cut.
  • Pull off the black rubber stopper from your bottle of adhesive remover.

  • Twist to loosen or remove the bottle cap before you cut the applicator tip.

  • This unseals the bottle and allows the pressure to equalize before you cut the applicator tip. If you skip this step, the adhesive remover may spray out unexpectedly when the tip is cut.

  • Use scissors to cut off the sealed tip of the applicator.

  • Cutting close to the narrow tip will give you better control so you can apply the adhesive remover in small amounts.

  • Twist and close the bottle cap securely before you proceed further.

从粘合剂去除剂瓶中拉出黑色橡胶塞。

切开涂药器尖端之前,请拧一下以拧松或取下瓶盖。

这样可以打开瓶子的密封,并允许你在切下喷头之前均衡压力。如果跳过此步骤,则割开尖端时,除胶剂可能会意外喷出。

用剪刀剪下涂药器的密封尖端。

在靠近狭窄的尖端进行切割你将更好控制,因此你可以少量使用除胶剂。

继续操作之前,请拧紧并拧紧瓶盖。

Your contributions are licensed under the open source Creative Commons license.