Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 27 guides that include this step.

English
Chinese

Translating step 1

Step 1
Before starting this procedure, you should disable your Mac's Auto Boot feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. Use this guide to disable Auto Boot.
Remove the screws securing the lower case
  • Before starting this procedure, you should disable your Mac's Auto Boot feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. Use this guide to disable Auto Boot.

  • If your MacBook is running Big Sur v11.1 or later, disabling Auto Boot may not work. You can proceed normally, but make sure to disconnect the battery as soon as you're inside.

  • Completely power off and unplug your MacBook Air before you start. Close the display and flip the entire laptop upside-down.

  • Use a P5 driver to remove the following screws:

  • Two 7.9 mm screws

  • Two 7.1 mm screws

  • Six 2.6 mm screws

在开始此过程之前,必须禁用Mac的自动重启功能。打开盖子时,Mac上的自动启动功能会打开,并且在拆卸过程中可能会意外触发。

使用本指南或按照下面的缩写说明禁用自动启动。开始之前,请完全关闭电源并拔下MacBook Air的电源。关闭显示屏,然后将整个笔记本电脑上下翻转。

使用P5 螺丝刀卸下以下螺丝:

2个7.9毫米螺丝

2个7.1毫米螺丝

6个2.6毫米螺丝

[title] Remove the screws securing the lower case
-[* icon_note] Before starting this procedure, you must disable your Mac's ***Auto Boot*** feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. [guide|110034|Use this guide|new_window=true] or follow the abbreviated instructions below to disable Auto Boot.
+[* icon_note] Before starting this procedure, you should disable your Mac's ***Auto Boot*** feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. [guide|110034|Use this guide|new_window=true] to disable Auto Boot.
+ [* black] If your MacBook is running Big Sur v11.1 or later, disabling Auto Boot may not work. You can proceed normally, but make sure to disconnect the battery as soon as you're inside.
[* icon_caution] Completely power off and unplug your MacBook Air before you start. Close the display and flip the entire laptop upside-down.
[* black] Use a P5 driver to remove the following screws:
[* red] Two 7.9 mm screws
[* orange] Two 7.1 mm screws
[* yellow] Six 2.6 mm screws

Your contributions are licensed under the open source Creative Commons license.