Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
French

Translating step 42

Step 42
The logic board assembly is a tight fit, but you can make it easier to remove by inserting a spudger under the left edge and levering it up slightly. There should be no resistance as you remove the logic board. Check all cables carefully and hold them out of the way if needed so they don't snag on the board.
  • The logic board assembly is a tight fit, but you can make it easier to remove by inserting a spudger under the left edge and levering it up slightly.

  • There should be no resistance as you remove the logic board. Check all cables carefully and hold them out of the way if needed so they don't snag on the board.

La carte mère est solidement encastrée, mais il est plus simple de la retirer en insérant une spatule sous le côté gauche et en faisant légèrement levier.

La carte mère ne devrait offrir aucune résistance quand vous faites levier. Vérifiez soigneusement nappes et câbles et repliez-les de côté si nécessaire pour qu'ils ne gênent pas.

Your contributions are licensed under the open source Creative Commons license.