Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Spanish

Translating step 42

Step 42
The logic board assembly is a tight fit, but you can make it easier to remove by inserting a spudger under the left edge and levering it up slightly. There should be no resistance as you remove the logic board. Check all cables carefully and hold them out of the way if needed so they don't snag on the board.
  • The logic board assembly is a tight fit, but you can make it easier to remove by inserting a spudger under the left edge and levering it up slightly.

  • There should be no resistance as you remove the logic board. Check all cables carefully and hold them out of the way if needed so they don't snag on the board.

El ensamblaje de la placa lógica está muy ajustado, pero puede hacer más fácil su extracción insertando un spudger bajo el borde izquierdo y haciendo palanca ligeramente hacia arriba.

No debería haber ninguna resistencia al retirar la placa lógica. Revisa todos los cables con cuidado y manténlos fuera del camino si es necesario para que no se enganchen en la placa.

Your contributions are licensed under the open source Creative Commons license.