Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Japanese

Translating step 14

Step 14
Using a T3 Torx Driver: Remove the two 1.3 mm screws securing the Thunderbolt flex cable cover on the left.
Disconnect the Thunderbolt cables
  • Using a T3 Torx Driver:

  • Remove the two 1.3 mm screws securing the Thunderbolt flex cable cover on the left.

  • Remove two more 1.3 mm screws from the Thunderbolt cable cover on the right.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.