Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Italian

Translating step 14

Step 14
Using a T3 Torx Driver: Remove the two 1.3 mm screws securing the Thunderbolt flex cable cover on the left.
Disconnect the Thunderbolt cables
  • Using a T3 Torx Driver:

  • Remove the two 1.3 mm screws securing the Thunderbolt flex cable cover on the left.

  • Remove two more 1.3 mm screws from the Thunderbolt cable cover on the right.

Con un cacciavite Torx T3:

Rimuovi le due viti da 1,3 mm che fissano la cover del cavo flessibile Thunderbolt sulla sinistra.

Rimuovi le due viti da 1,3 mm che bloccano la cover del cavo flessibile Thunderbolt sul lato destro.

Your contributions are licensed under the open source Creative Commons license.