Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Italian

Translating step 12

Step 12
Use a T3 Torx driver to remove the two 1.9 mm screws securing the bracket for the Touch Bar display cable connector. Remove the bracket.
Disconnect the Touch Bar display connector
  • Use a T3 Torx driver to remove the two 1.9 mm screws securing the bracket for the Touch Bar display cable connector.

  • Remove the bracket.

Usa un cacciavite Torx T3 per rimuovere le due viti da 1,9 mm che bloccano la staffa del connettore del cavo schermo del Touch Bar.

Rimuovi la staffa.

Your contributions are licensed under the open source Creative Commons license.