Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
French

Translating step 12

Step 12
Use a T3 Torx driver to remove the two 1.9 mm screws securing the bracket for the Touch Bar display cable connector. Remove the bracket.
Disconnect the Touch Bar display connector
  • Use a T3 Torx driver to remove the two 1.9 mm screws securing the bracket for the Touch Bar display cable connector.

  • Remove the bracket.

Servez-vous du tournevis Torx T3 pour retirer les deux vis de 1,9 mm qui fixent le cache du connecteur de la nappe de l'écran de la Touch Bar.

Ôtez le cache.

Your contributions are licensed under the open source Creative Commons license.