Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Spanish

Translating step 12

Step 12
Use a T3 Torx driver to remove the two 1.9 mm screws securing the bracket for the Touch Bar display cable connector. Remove the bracket.
Disconnect the Touch Bar display connector
  • Use a T3 Torx driver to remove the two 1.9 mm screws securing the bracket for the Touch Bar display cable connector.

  • Remove the bracket.

Utiliza un destornillador Torx T3 para retirar los dos tornillos de 1.9 mm que fijan el soporte para el conector del cable de la pantalla de la Touch Bar.

Remueve el soporte.

Your contributions are licensed under the open source Creative Commons license.