Skip to main content

2019 年16 寸 MacBook Pro 触控板更换

Guide Prerequisites

All prerequisite guides must be translated before this translation is considered complete.


2019年16寸MacBook Pro 底壳更换

断开 16寸 MacBook Pro (2019年)的电池

Guide Information

= Done = Incomplete
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      '''***To reassemble your device, follow the above steps in reverse order.'''***
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Check out our [link||Answers community] for troubleshooting help.

      Describe the specific part or component of this device you're working on. Ex: Battery

      Create a title.

      This brief summary will only appear in search results.

      Communicate background information before the reader dives into the guide.

      Guide Steps

      Step 1 — 移除触控板

      使用T3 Torx 螺丝刀拆下两个1.8毫米螺丝,固定键盘和触控板电缆接口的托架。

      Step 2 — 断开触控板电缆


      Step 3


      Step 4


      Step 5 — 移除触控板组件

      使用T5 Torx 螺丝刀来拆卸固定触控板总成的13个螺丝:

      Step 6 — 移除触控板

      稍微打开显示器,但保持 MacBook上下颠倒。触控板组件应该分开并平放在显示器上。

      Step 7


      Your contributions are licensed under the open source Creative Commons license.