Skip to main content

Fix Your Stuff

Right to Repair



Repair a Dexter Corded Belt Sander - 900W 2.5in width

Guide Information

= Done = Incomplete

      Describe the specific part or component of this device you're working on. Ex: Battery

      Create a title.

      This brief summary will only appear in search results.

      Communicate background information before the reader dives into the guide.

      Guide Steps

      Step 1 — Unplug

      Before starting, remember to unplug the device.

      Step 2

      Remove the handle by unscrewing the screw.

      Step 3

      Pry up the sanding belt to remove it.

      Step 4

      Unscrew the four screws to access the drive belt.

      Step 5

      Remove the drive belt.

      Step 6

      Replace with the new drive belt. To put it on, place the drive belt on the right wheel first.

      Step 7

      Screw the protection cap back into place with the four screws.

      Step 8

      Replace the sanding belt and handle.

      Your contributions are licensed under the open source Creative Commons license.