Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

English
Italian

Translating step 4

Step 4
In this step you will disconnect the camera cable. Most machines will have a small self adhesive plastic retainer stuck to the logic board to keep the connector in place. Before disconnecting the cable, be sure this retainer is moved out of the way.
  • In this step you will disconnect the camera cable. Most machines will have a small self adhesive plastic retainer stuck to the logic board to keep the connector in place. Before disconnecting the cable, be sure this retainer is moved out of the way.

  • Pull the camera cable connector toward the optical drive to disconnect it from the logic board.

  • This socket is metal and easily bent. Be sure to align the connector with its socket on the logic board before mating the two pieces.

In questo passaggio scollegherai il cavo della fotocamera. La maggior parte delle macchine hanno un piccolo blocco automatico adesivo incastrato sulla scheda madre per tenere fermo il connettore. Prima di scollegare il cavo, assicurati che questo blocco sia spostato.

Tira il cavo della fotocamera verso il lettore CD per scollegarlo dalla scheda madre.

Questa presa è in metallo e si piega facilmente. Assicurati di allineare il connettore con la sua presa sulla scheda madre prima di collegare le due parti.

Your contributions are licensed under the open source Creative Commons license.