Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
German

Translating step 1

Step 1
Use the tip of a spudger to push the edges of the I/O board power connector straight out of its socket on the logic board. It is recommended to carefully push on both sides of the connector to "walk" it out of its socket.
  • Use the tip of a spudger to push the edges of the I/O board power connector straight out of its socket on the logic board.

  • It is recommended to carefully push on both sides of the connector to "walk" it out of its socket.

Drücke die Kanten des Steckers an der Stromversorgung des I/O Boards mit der Spudgerspitze gerade aus dem Anschluss auf dem Logic Board.

Es empfiehlt sich, vorsichtig abwechselnd auf beiden Seiten des Steckers zu drücken, um ihn so aus dem Anschluss "herauswandern" zu lassen.

Your contributions are licensed under the open source Creative Commons license.