Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.


Translating step 11

Step 11
Remove the antenna cable assembly.
  • Remove the antenna cable assembly.

  • During reassembly, gently pinch the cable bundle together and guide it under the heat pipe into the correct position on the board. If needed, use your tools to help guide it through, but don't force it.

Ôtez l'ensemble antenne.

Lors du remontage, pincez délicatement le faisceau de câbles et faites-le passer sous le caloduc afin de le positionner correctement. Si nécessaire, aidez-vous de vos outils, mais ne forcez pas.

Your contributions are licensed under the open source Creative Commons license.