Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
French

Translating step 6

Step 6
Remove the four 3.9 mm T5 Torx screws (two from each side) securing the antenna cable assembly. Also remove the twelve 1.1 mm P2 pentalobe screws (six from each side).
  • Remove the four 3.9 mm T5 Torx screws (two from each side) securing the antenna cable assembly.

  • Also remove the twelve 1.1 mm P2 pentalobe screws (six from each side).

Dévissez les vis Torx T5 de 3,9 mm qui fixent l'ensemble antenne. Il y en a deux de chaque côté.

Retirez également les vis Pentalobe P2 de 1,1 mm. Il y en a six de chaque côté.

Your contributions are licensed under the open source Creative Commons license.