Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
French

Translating step 5

Step 5
Remove the four 1.5 mm T3 Torx screws securing the two aluminum covers on top of the two display board cables. Use a pair of tweezers to remove the two aluminium covers. Use a pair of tweezers to remove the two aluminium covers.
Unscrew the antenna cable assembly
  • Remove the four 1.5 mm T3 Torx screws securing the two aluminum covers on top of the two display board cables.

  • Use a pair of tweezers to remove the two aluminium covers.

Dévissez les quatre vis Torx T3 de 1,5 mm qui fixent les caches en aluminium des connecteurs des deux nappes d'écran.

Retirez-les à l'aide d'une pincette.

Your contributions are licensed under the open source Creative Commons license.