Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 13 guides that include this step.

English
Chinese

Translating step 1

Step 1
Carefully peel up the large piece of tape covering the battery connector, on the edge of the logic board nearest the battery. Remove the tape.
Uncover the battery connector
  • Carefully peel up the large piece of tape covering the battery connector, on the edge of the logic board nearest the battery.

  • Remove the tape.

小心地剥掉覆盖在电池接口上的一大块胶带,它位于离电池最近的逻辑板边缘。

移除胶布。

Your contributions are licensed under the open source Creative Commons license.