Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 13 guides that include this step.

English
Dutch

Translating step 1

Step 1
Carefully peel up the large piece of tape covering the battery connector, on the edge of the logic board nearest the battery. Remove the tape.
Uncover the battery connector
  • Carefully peel up the large piece of tape covering the battery connector, on the edge of the logic board nearest the battery.

  • Remove the tape.

Peuter het grote stuk tape dat aan de zijkant van het logic board het dichtst bij de batterij over de batterijaansluiting heen geplakt is, los.

Verwijder de tape.

Your contributions are licensed under the open source Creative Commons license.