Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 13 guides that include this step.

English
Spanish

Translating step 1

Step 1
Carefully peel up the large piece of tape covering the battery connector, on the edge of the logic board nearest the battery. Remove the tape.
Uncover the battery connector
  • Carefully peel up the large piece of tape covering the battery connector, on the edge of the logic board nearest the battery.

  • Remove the tape.

Con cuidado, despega el gran trozo de cinta que cubre el conector de la batería, en el borde de la placa lógica más cercana a la batería.

Remueve la cinta.

Your contributions are licensed under the open source Creative Commons license.