Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 13 guides that include this step.

English
German

Translating step 1

Step 1
Carefully peel up the large piece of tape covering the battery connector, on the edge of the logic board nearest the battery. Remove the tape.
Uncover the battery connector
  • Carefully peel up the large piece of tape covering the battery connector, on the edge of the logic board nearest the battery.

  • Remove the tape.

Ziehe vorsichtig das große Stück Klebeband ab, das den Akkustecker am Rand des Logic Boards ganz nah am Akku abdeckt.

Entferne das Klebeband.

Your contributions are licensed under the open source Creative Commons license.