Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 10 guides that include this step.

English
Spanish

Translating step 5

Step 5
Insert your opening pick once again under the front edge of the lower case, near one of the two centermost screw holes. Give the pick a firm twist to pop free the third clip securing the lower case to the chassis. Repeat this procedure near the other of the two centermost screw holes, popping the fourth clip free.
  • Insert your opening pick once again under the front edge of the lower case, near one of the two centermost screw holes.

  • Give the pick a firm twist to pop free the third clip securing the lower case to the chassis.

  • Repeat this procedure near the other of the two centermost screw holes, popping the fourth clip free.

Inserta tu púa de apertura una vez más bajo el borde frontal de la caja inferior, cerca de uno de los dos agujeros centrales para tornillos.

Dale un giro firme a la púa para liberar el tercer clip que asegura la caja inferior al chasis.

Repite el paso anterior en el lado opuesto, deslizando la púa de apertura debajo de la minúscula y subiendo por el lado para liberar el segundo clip.

Your contributions are licensed under the open source Creative Commons license.