Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 10 guides that include this step.

English
Spanish

Translating step 1

Step 1
Before proceeding, unplug and power down your MacBook. Close the display and lay it on a soft surface, top-side down.
Remove the pentalobe screws
  • Before proceeding, unplug and power down your MacBook. Close the display and lay it on a soft surface, top-side down.

  • Use a P5 Pentalobe driver to remove the six screws securing the lower case:

  • Two 6.2 mm screws

  • Four 3.4 mm screws

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

Antes de proceder, desenchufa y apaga tu MacBook. Cierra la pantalla y colócala en una superficie blanda, con la parte superior hacia abajo.

Usa un destornillador P5 Pentalobe para remover seis tornillos que sujetan la caja inferior.

Dos tornillos de 6.2 mm

Cuatro tornillos de 3.4 mm

A lo largo de esta reparación, haz un seguimiento de cada tornilloy asegúrate de que vuelva exactamente a su lugar de origen para evitar dañar tu dispositivo.

Your contributions are licensed under the open source Creative Commons license.