Skip to main content
English
Chinese

Translating step 4

Step 4
With a Digital Multimeter (Volt Meter) set to DC Volts, measure the cell balance.  The nickle straps are good test points.  Note the cell voltages.
  • With a Digital Multimeter (Volt Meter) set to DC Volts, measure the cell balance. The nickle straps are good test points. Note the cell voltages.

  • Cell 1: TP6 to CL1

  • Cell 2: CL1 to CL2

  • Cell 3: CL2 to CL3

  • Cell 4: CL3 to CL4

  • Cell 5: CL4 to CL5 (Battery Pos)

  • The cell voltages should be in the range 3.0V to 4.2V. The cells should all read about the same, say 3.9V. If the cells are more than 0.1V different, then cell imbalance could be a problem for your battery pack.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.