Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
Italian

Translating step 5

Step 5
Insert a fourth opening pick under the top right corner of the back cover. Slide the tip of the opening pick along the side of the phone to the bottom right corner to cut the adhesive. Leave the opening pick in the bottom right corner to prevent the adhesive from resealing.
  • Insert a fourth opening pick under the top right corner of the back cover.

  • Slide the tip of the opening pick along the side of the phone to the bottom right corner to cut the adhesive.

  • Leave the opening pick in the bottom right corner to prevent the adhesive from resealing.

Inserisci un quarto plettro di apertura sotto l'angolo superiore destro della cover posteriore.

Fai scorrere la punta del plettro di apertura lungo il lato del telefono fino all'angolo inferiore destro per tagliare l'adesivo.

Lascia il plettro di apertura nell'angolo inferiore destro per impedire che la colla possa riattaccarsi.

Your contributions are licensed under the open source Creative Commons license.