Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
Italian

Translating step 2

Step 2
Insert an opening pick at the bottom of your phone near the USB-C port. If you can't get between the back cover and midframe with your opening pick, you can use a suction handle or strong tape to pull up the back cover to create a gap. Slide the opening pick to the bottom left corner.
  • Insert an opening pick at the bottom of your phone near the USB-C port.

  • If you can't get between the back cover and midframe with your opening pick, you can use a suction handle or strong tape to pull up the back cover to create a gap.

  • Slide the opening pick to the bottom left corner.

Inserisci un plettro di apertura dal lato inferiore del telefono vicino alla porta USB-C.

Se non riesci a infilare il plettro di apertura tra la cover posteriore e il midframe, puoi usare una ventosa oppure del nastro adesivo tenace per sollevare il pannello posteriore quanto basta a creare una fessura.

Fai scorrere il plettro di apertura fino all'angolo inferiore sinistro.

Your contributions are licensed under the open source Creative Commons license.