Skip to main content
English
Japanese

Translating step 6

Step 6
2. Installation of Front Box Place box inside vehicle. It fits through the rear doors. This is a 2 person job. Mount front legs on front consoles, tighten loosely (2 Bolts M10 x 1.5 x35mm 6mm Allen cap, 10mm flat washers). Pay attention not to break off the alignment pin, which will be inside the post after mounting.
  • 2. Installation of Front Box

  • Place box inside vehicle. It fits through the rear doors. This is a 2 person job.

  • Mount front legs on front consoles, tighten loosely (2 Bolts M10 x 1.5 x35mm 6mm Allen cap, 10mm flat washers). Pay attention not to break off the alignment pin, which will be inside the post after mounting.

  • DO NOT mount the box to the center bracket at this point

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.