Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 42 guides that include this step.

English
German

Translating step 2

Step 2
Remove the following screws securing the battery connector board to the logic board:
  • Remove the following screws securing the battery connector board to the logic board:

  • Two 2.8 mm T6 Torx screws

  • One 7.0 mm T6 Torx shouldered screw

Entferne die folgenden Schrauben, mit denen die Platine des Akkuanschlusses am Logic Board befestigt ist:

Zwei 2,8 mm T6 Torx Schrauben

Eine 7,0 mm T6 Torx Paß-Schulterschraube

Your contributions are licensed under the open source Creative Commons license.