Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
German

Translating step 3

Step 3
Insert the pointed end of a spudger into the notch at the top left edge of the plastic cover. Pry up with the spudger to lift the upper edge of the cover and release the clips holding the cover down. Remove the plastic cover.
  • Insert the pointed end of a spudger into the notch at the top left edge of the plastic cover.

  • Pry up with the spudger to lift the upper edge of the cover and release the clips holding the cover down.

  • Remove the plastic cover.

Schiebe einen Spudger in die Kerbe an der oberen linken Kante der Abdeckung.

Heble den Mittelrahmen nach oben, damit sich die Clips lösen, die die Abdeckung festhalten.

Entferne die Plastik-Abdeckungen.

Your contributions are licensed under the open source Creative Commons license.