Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 9 guides that include this step.

English
Spanish

Translating step 10

Step 10
If the glass remains stuck, re-heat and slice the adhesive repeatedly as needed. Lift the rear glass carefully, making sure it's fully separated from any adhesive.
  • If the glass remains stuck, re-heat and slice the adhesive repeatedly as needed.

  • Lift the rear glass carefully, making sure it's fully separated from any adhesive.

  • Remove the rear glass.

  • During reassembly, pause here to replace the adhesive on the rear glass using a precut adhesive card or high-strength double-sided adhesive tape, such as Tesa 61395.

  • After closing your device back up during reassembly, stack something heavy, like a textbook or two, on top of the device for 30-60 minutes. This ensures a strong adhesive bond.

Si el cristal continúa atascado, vuelve a calentar y cortar el adhesivo cuantas veces sea necesario.

Levanta el cristal trasero con cuidado, asegurándote de que esté completamente separado del adhesivo.

Remueve el cristal trasero.

Durante el reensamblaje, haz una pausa aquí para reemplazar el adhesivo del cristal trasero con una tarjeta adhesiva precortada o una cinta adhesiva de doble cara de alta resistencia, como la Tesa 61395.

Después de cerrar el dispositivo durante el reensamblaje, apila algo pesado, como un libro de texto o dos, encima del dispositivo durante 30-60 minutos. Esto asegura una fuerte unión adhesiva.

Your contributions are licensed under the open source Creative Commons license.