Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
Japanese

Translating step 11

Step 11
Open the iPhone by swinging the display up from the left side, like the back cover of a book. Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPhone's logic board. Lean the display against something to keep it propped up while you're working on the phone.
Open the iPhone
  • Open the iPhone by swinging the display up from the left side, like the back cover of a book.

  • Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPhone's logic board.

  • Lean the display against something to keep it propped up while you're working on the phone.

  • During reassembly, lay the display in position, align the clips along the top edge, and carefully press the top edge into place before snapping the rest of the display down. If it doesn't click easily into place, check the condition of the clips around the perimeter of the display and make sure they aren't bent.

iPhoneのディスプレイを左側から、ほんの表紙をめくるように、開きます。

ディスプレイを完全に外さないでください。幾つかのデリケートなリボンケーブルがiPhoneのロジックボードに接続されたままです。

作業中、ディスプレイを衝立てて固定するため、ディスプレイ背面側に箱を設置してください。

再組み立ての際は、ディスプレイをオリジナルの位置に配置して、クリップを上端に沿って合わせ、上端を慎重に押してクリップを装着してから、残りのディスプレイを取り付けます。上手くはまらない場合は、ディスプレイの周囲にあるクリップの状態を確認し、曲がっていないことを確認してください。

Your contributions are licensed under the open source Creative Commons license.