Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
Spanish

Translating step 11

Step 11
Open the iPhone by swinging the display up from the left side, like the back cover of a book. Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPhone's logic board. Lean the display against something to keep it propped up while you're working on the phone.
Open the iPhone
  • Open the iPhone by swinging the display up from the left side, like the back cover of a book.

  • Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPhone's logic board.

  • Lean the display against something to keep it propped up while you're working on the phone.

  • During reassembly, lay the display in position, align the clips along the top edge, and carefully press the top edge into place before snapping the rest of the display down. If it doesn't click easily into place, check the condition of the clips around the perimeter of the display and make sure they aren't bent.

Abre el iPhone moviendo la pantalla hacia arriba desde el lado izquierdo, como si fuera la contratapa de un libro.

No trates de separar completamente la pantalla aun ya que varios frágiles cables planos todavía la conectan con la placa lógica del iPhone.

Apoya la pantalla contra algo para mantenerla en alto mientras trabajas con el teléfono.

Durante el ensamblado, alinea los clips a lo largo del borde superior y con cuidado presiona el borde superior en su lugar antes de encajar el resto de la pantalla. Si no se encaja fácilmente, verifica la condición de los clips alrededor del perímetro de la pantalla para asegurarte que no estén doblados.

Your contributions are licensed under the open source Creative Commons license.