Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
Japanese

Translating step 5

Step 5
Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case. Insert an opening pick into the gap. The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.
Lift the display slightly
  • Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.

  • Insert an opening pick into the gap.

  • The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

しっかりと一定の力で吸盤カップを引き上げ、フロントパネルとリアケースの間にわずかな隙間を作ります。

隙間に開口ピックを挿入します。

ディスプレイを固定している接着剤は非常に強力です。 まず最初に、隙間を作る作業にはかなりの力が必要です。 作業が上手く進まない場合は、さらに熱を加えて温め、スクリーンを上下に軽く揺らしながら接着剤を弱め、ツールを挿入するのに十分な隙間を作ります。

Your contributions are licensed under the open source Creative Commons license.