Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
Spanish

Translating step 6

Step 6
Remove the loudspeaker. Before you install a replacement loudspeaker, check the adhesive gasket.
  • Remove the loudspeaker.

  • Before you install a replacement loudspeaker, check the adhesive gasket.

  • If it is in good condition, you can re-use the gasket. Make sure that the gasket does not cover the exit hole.

  • If the gasket is pulled out of place, remove it and replace the adhesive with a pre-cut strip or Tesa tape.

Remueve el altavoz.

Antes de instalar el altavoz de reemplazo, verifica el estado de la junta adhesiva.

Si está en buenas condiciones, puedes reutilizarla. Asegúrate de que la junta no cubra el orificio de salida.

Si la junta está fuera de lugar, remuévela y reemplaza el adhesivo con una tira pre-cortada o cinta Tesa.

Your contributions are licensed under the open source Creative Commons license.