Describe the specific part or component of this device you're working on. Ex: Battery
Create a title.
This brief summary will only appear in search results.
Communicate background information before the reader dives into the guide.
Step 1 — Make the laptop ready to disassemble
Shut down the laptop
Step 2 — Remove the main body screws
Remove all marked screws
Step 3 — Remove the disk drive
Slide the disk drive out of the case
Step 4 — Remove back cover
Remove the back cover by sliding it down
Step 5 — Unplug connectors
Use the flat end of a spudger to unplug the marked connector
Step 6 — Remove hardware
Remove the HDD by unscrewing the marked screws and sliding its case towards the arrow
Step 7 — Remove main body screws
Remove the marked screws
Step 8 — Opening the case
Start opening the case by inserting a opening pick on corner of the headphone jack side
Step 9 — Opening the battery side of the case
Insert opening picks and make sure all plastic clips are free
Step 10 — Open the laptop
Open the keyboard side of the laptop while holding the aluminium body
Step 11 — Perform maintenance
You now have gain access to the internal hardware of the laptop
Your contributions are licensed under the open source Creative Commons license.