Fix Your Stuff Community Store

Xbox One Disc Drive PCB Replacement

Previous step Next step

Translating step 4

Back to Guide
English
Korean
Step 4
Xbox One Disc Drive PCB Replacement, Desolder the cables: step 0, image 1 of 3 Xbox One Disc Drive PCB Replacement, Desolder the cables: step 0, image 2 of 3 Xbox One Disc Drive PCB Replacement, Desolder the cables: step 0, image 3 of 3
Desolder the cables

  • You will see an red and an black cable soldered to the PCB.

  • Now get your solder iron ready to desolder the 2 cables. Heat and melt the solder, with your other hand hold the tweezer. When the solder is melting, remove the cable with your tweezer to get the cable out.

  • It's recommended you use desoldering wick, so you can put some fresh new solder on the pads. Recommended but not required.

  • Now it should look like the last photo.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.