Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 10 guides that include this step.

English
French

Translating step 3

Step 3
Slide the opening pick along the left and right edges of the phone to release the midframe clips. Lift the bottom edge of the plastic midframe up but do not remove the midframe. The midframe is still tethered to the phone by the fragile proximity sensor cable at the top edge. To reinstall the plastic midframe, align the midframe to the back cover, and squeeze the perimeter of the phone with your fingers to snap the clips back into position.
  • Slide the opening pick along the left and right edges of the phone to release the midframe clips.

  • Lift the bottom edge of the plastic midframe up but do not remove the midframe. The midframe is still tethered to the phone by the fragile proximity sensor cable at the top edge.

  • To reinstall the plastic midframe, align the midframe to the back cover, and squeeze the perimeter of the phone with your fingers to snap the clips back into position.

Parcourez les bords droit et gauche du téléphone pour défaire les clips du châssis central.

Soulevez le bord inférieur du châssis vers le haut, mais ne l'enlevez pas encore. Le bord supérieur du châssis est toujours accroché au téléphone par la fragile nappe du capteur de proximité.

Pour remonter le châssis central en plastique, alignez-le d'abord au-dessus de la coque arrière. Appuyez ensuite sur tout le pourtour du téléphone avec vos doigts pour l'encastrer et fermer les clips.

Your contributions are licensed under the open source Creative Commons license.