Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 10 guides that include this step.

English
Italian

Translating step 2

Step 2
The midframe is still held in place by plastic clips. Insert an opening pick into frame seam at the bottom of the phone. This seam sits between the plastic midframe and the back cover. Slide the pick along the seam to release the clips holding the plastic midframe.
  • The midframe is still held in place by plastic clips.

  • Insert an opening pick into frame seam at the bottom of the phone. This seam sits between the plastic midframe and the back cover.

  • Slide the pick along the seam to release the clips holding the plastic midframe.

Il midframe è ancora bloccato da alcune clip di plastica.

Inserisci un plettro di apertura nella giunzione della scocca nella parte inferiore del telefono. Questa giunzione si trova tra il midframe in plastica e la cover posteriore.

Fai scorrere il plettro lungo la giunzione per liberare le clip che trattengono il midframe in plastica.

Your contributions are licensed under the open source Creative Commons license.