Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 10 guides that include this step.

English
Spanish

Translating step 2

Step 2
The midframe is still held in place by plastic clips. Insert an opening pick into frame seam at the bottom of the phone. This seam sits between the plastic midframe and the back cover. Slide the pick along the seam to release the clips holding the plastic midframe.
  • The midframe is still held in place by plastic clips.

  • Insert an opening pick into frame seam at the bottom of the phone. This seam sits between the plastic midframe and the back cover.

  • Slide the pick along the seam to release the clips holding the plastic midframe.

El marco medio se mantiene en su lugar mediante clips de plástico.

Inserta una púa de apertura en la juntura del marco en la parte inferior del teléfono. Esta costura se encuentra entre el marco medio de plástico y la tapa trasera.

Desliza la púa a lo largo de la costura para soltar los clips que sujetan el marco medio de plástico.

Your contributions are licensed under the open source Creative Commons license.