Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 10 guides that include this step.

English
German

Translating step 2

Step 2
The midframe is still held in place by plastic clips. Insert an opening pick into frame seam at the bottom of the phone. This seam sits between the plastic midframe and the back cover. Slide the pick along the seam to release the clips holding the plastic midframe.
  • The midframe is still held in place by plastic clips.

  • Insert an opening pick into frame seam at the bottom of the phone. This seam sits between the plastic midframe and the back cover.

  • Slide the pick along the seam to release the clips holding the plastic midframe.

Der Mittelrahmen wird immer noch von Plastikrasten festgehalten.

Setze ein Plektrum unten am Smartphone in die Fuge am Rahmen. Diese Fuge befindet sich zwischen dem Plastikmittelrahmen und der Rückabdeckung.

Schiebe das Plektrum die Fuge entlang, so dass sich die Rasten vom Plastikmittelrahmen lösen.

Your contributions are licensed under the open source Creative Commons license.