Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
German

Translating step 28

Step 28
Use the tip of a spudger to pry the antenna cable tape up from the rear case of the iPad. Gently pull the antenna cable out of the way as you work along the piece of tape, to keep it from resealing. Gently pull the antenna cable out of the way as you work along the piece of tape, to keep it from resealing.
  • Use the tip of a spudger to pry the antenna cable tape up from the rear case of the iPad.

  • Gently pull the antenna cable out of the way as you work along the piece of tape, to keep it from resealing.

Löse das Klebeband am Antennenkabel mit der Spudgerspitze vom Rückgehäuse des iPads ab.

Ziehe das Antennenkabel während des Ablösens des Klebebands sorgfältig aus dem Weg, so dass es nicht wieder ankleben kann.

Your contributions are licensed under the open source Creative Commons license.