Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
German

Translating step 22

Step 22
Use the tip of a spudger to peel back the small piece of tape covering both antenna cables on the bottom right side of the iPad. Leave the lower part of the tape stuck to the back of the rear case to aid in reassembly.
  • Use the tip of a spudger to peel back the small piece of tape covering both antenna cables on the bottom right side of the iPad.

  • Leave the lower part of the tape stuck to the back of the rear case to aid in reassembly.

Ziehe das kleine Stückchen Klebeband, welches beide Antennenkabel in der unteren rechten Seite des iPads bedeckt, mit der Spudgerspitze zurück.

Lasse den unteren Teil des Klebebands auf der Rückseite des Rückgehäuses kleben, das erleichtert den Zusammenbau.

Your contributions are licensed under the open source Creative Commons license.