Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 16 guides that include this step.

English
Japanese

Translating step 21

Step 21
Leave the pick from the last step in place to prevent the adhesive from re-sealing. With a new pick, slice gently over the left-hand antenna, stopping before the home button. Only slide the pick from the outer edge toward the center of the iPad. Do not move the pick back toward the outer edge, as moving in this direction may damage the antenna.
  • Leave the pick from the last step in place to prevent the adhesive from re-sealing.

  • With a new pick, slice gently over the left-hand antenna, stopping before the home button.

  • Only slide the pick from the outer edge toward the center of the iPad. Do not move the pick back toward the outer edge, as moving in this direction may damage the antenna.

  • If you need to slide the pick over the lower section more than once, remove it and re-insert at the outer edge, and slide inwards.

  • Leave the pick in place before moving on.

接着剤の再接着を防ぐために、前に残した開口ピックはそのままの位置に残してしておきます。

新しい開口ピックを使って、左側のアンテナ上をゆっくりと切開し、ホームボタンの手前で止めます。

ピックは外周からiPadの中心に向かって滑らせてください。外周に向かってピックを戻すと、アンテナが破損する恐れがあります。

もし、ピックを下の部分に何度もスライドさせる必要がある場合は、ピックを外して外周部に再度挿入し、内側にスライドさせてください。

ピックはそのままにして次に進みます。

Your contributions are licensed under the open source Creative Commons license.