Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 16 guides that include this step.

English
German

Translating step 4

Step 4
While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad. Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD. Pull the suction cup's plastic nub to release the vacuum seal and remove the suction cup from the display assembly.
  • While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad.

  • Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD.

  • Pull the suction cup's plastic nub to release the vacuum seal and remove the suction cup from the display assembly.

Während du das Glas mit dem Saughebe hochhältst, schieb die Spitze eines Plektrums in die Lücke zwischen Glas und Rahmen des iPad.

Schiebe das Plektrum nicht weiter, als der schwarze Rand des iPads breit ist. Wenn du das Plektrum zu weit hineinschiebst riskierst du eine Beschädigung des LCDs.

Ziehe nun an der Plastiknoppe des Saughebers und löse ihn vorsichtig von der Displayeinheit ab.

Your contributions are licensed under the open source Creative Commons license.