Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 16 guides that include this step.

English
Japanese

Translating step 3

Step 3
Carefully place a suction cup halfway up the heated side. Be sure the cup is completely flat on the screen to get a tight seal. While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel glass from from the rear case.
  • Carefully place a suction cup halfway up the heated side.

  • Be sure the cup is completely flat on the screen to get a tight seal.

  • While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel glass from from the rear case.

  • Be careful to only lift the glass enough to insert an opening pick—any more and you risk cracking the glass.

温めた側の中央部分付近に、吸盤カップを装着します。

カップが、スクリーン上で水平にしっかりと取り付けてあるか確認してください。

iPadを片手で抑えながら、吸盤カップを引き上げて、リアケースからフロントパネルのガラスをわずかに乖離させます。

開口ピックが挿入できるだけのスペースを作るだけで十分です。それ以上外してしまうと、ガラスが割れてしまうことがあります。

Your contributions are licensed under the open source Creative Commons license.