Skip to main content
English
Japanese

Translating step 2

Step 2
Insert an opening pick under top edge of the rear camera bezel. Slide the opening pick around the edges of the camera bezel to separate the adhesive securing it to the rear glass. Do not pry on the side that sits against the fingerprint sensor.
  • Insert an opening pick under top edge of the rear camera bezel.

  • Slide the opening pick around the edges of the camera bezel to separate the adhesive securing it to the rear glass.

  • Do not pry on the side that sits against the fingerprint sensor.

開口ピックをリアカメラベゼル上部端の下に差し込みます。

開口ピックをカメラベゼル端に沿ってスライドして、リアガラスに固定された接着剤から剥がします。

指紋センサーと隣り合う側はこじ開けないでください。

Your contributions are licensed under the open source Creative Commons license.