Skip to main content
German
English

Gasket in the inlet valve

Guide Information

= Done = Incomplete

      Describe the specific part or component of this device you're working on. Ex: Battery

      Create a title.

      This brief summary will only appear in search results.

      Communicate background information before the reader dives into the guide.

      Guide Steps

      Step 1

      Open the side panel and remove the brewing unit.

      Step 2

      Remove the drip tray underneath the brewing unit.

      Step 3

      Unscrew the four Torx T10 screws that hold in place the cover of the inlet valve.

      Step 4

      Replace the gaskets using a blunt tool, such as a spatula.

      Step 5

      Your contributions are licensed under the open source Creative Commons license.